This complete installation solution is designed to enable a Flat Screen or Touch Screen to be fixed to a wooden stud partition wall.
The kit includes two upright supporting legs which are fixed to the existing upright wooden studs inside the wall with coach screws included, then the variable height and width cross brace is fixed to a horizontal wooden stud in-between the two supporting legs. This creates a safe and strong fixed mounting frame secured to the wall for the Flat Screen Mount (included) to fix onto and position the screen at a selection of height settings. All fixings, bolts, coach screws and plastic caps are included for a neat and tidy installation.
The two supporting legs are a hollow design to allow connection cables to and from the screen to be routed through them. Cable exit / entry slots are positioned at various heights on the inner and outer sides of each leg to enable surface mounted cable trunking to route cables away to a connection panel (not included).
Maximum CENTRE of screen height from floor level approximately1300mm.
Minimum CENTRE of screen height from floor level approximately 1050mm.
Suitable for any size screen with a maximum VESA mount configuration of 800 x 600 and up to a maximum weight of 50kg.
Full fitting instructions included with each kit and are avaialable above in PDF format for your reference.
Finished in durable White or Black powder coat finish.