Extreme Short Throw Projector (EST-P1)

• WXGA (1280 x 800) up to 1080i
• Brightness (ANSI lumens) 2200 ANSI (normal) 2500 ANSI (high)
• Contrast Ratio 2000:1
• Noise level 28dB (normal) 32dB (high brightness mode)
• Manual Focus
• Focal length F=2.4
• Projection Distance 0.39m – 0.56m (15in – 22in)
• Projection Distance 1.98m – 2.79m (78in – 110in)
• Keystone Correction Vertical: max ±15°
• Inputs/Outputs – D-sub 15 (RGB) x 2, HDMI V1.3 x 1, S-Video x 1, Composite Video (RCA) x 1, USB control x 1, Networking LAN (RJ45) x 1, RS-232C (D-sub 9) x 1

Integrated USB Sound

• 20W per channel RMS
• Controls Volume, Base, Treble, on/off
• Amplifier Frequency Response 40Hz to 18kHz +/-3dB (at 1W)
• USB Sound supported for Minimum System Requirements stated
• Connectivity – Inputs (4) Stereo PC, Stereo CD/DVD, Mono Auxiliary, Microphone to PC via PC
• Connectivity – Outputs (2) 2 Stereo
• Power Requirement 18V 3.3 Amp

Adjustable Frame

• Height-adjustable mount, with 600mm of adjustment from 350mm to 950mm ± 50mm. Top and bottom limit stops are fitted if the full range of movement is not required/appropriate. Height adjustment is powered by an electrical motor and is operated using a switch on the side of the stand
• Room height requirement Min. 2.66m for full range operation
• Weight Approx. 59.1kg
• Projector mount Aluminum arm, extends 550mm (21.7in) from the wall, adjusts with the height of the ActivBoard reducing the need for specific re-calibration following height adjustment
• Connectivity panel with inputs for 2 x fully wired VGA (to support VESA DDC) plus 3.5mm stereo jack audio inputs, USB-B input (for ActivBoard), S-Video, composite video plus auxiliary audio jack inputs, Cat 5e Ethernet input. Connectivity panel can be mounted on the left or right-hand side of the frame